Additional Products



A quick, easy and economical method to repair and waterproof leaking  seams and flashings on rubber membrane type roofs that are rolled out on the roof as a single layer. Hypalon and EPDM roofs. Intended for roofs  no longer under manufacturer warranty. Apply NEOPRENE 66, imbed  SEAM-LOCK and allow to dry. Top coat with WHITE-STAR. One kit provides  ample material to reinforce 300 feet of seam or flashing repair. Colors: Black or White.

One SINGLE-PLY ROOF REPAIR KIT consists of: 3 5-gal. NEOPRENE 66, 1 5-gal. WHITE-STAR, 1 4"x300' SEAM LOCK.


The time to fix a leak is the minute you detect the entry of water  into a building. The EMERGENCY ROOF REPAIR KIT is sized perfectly to  make several small emergency repairs. Both WET-JET and SUPER ROOF CEMENT have a special water repellant additive that cuts through the moisture  to create a perfect, permanent bond with the roof mat so repairs can be  made in any weather, wet or dry, at any temperature. After storms  subside, WET-JET can be applied to renew the entire roof area. One kit  covers approximately 1,000 sq. ft. on a paper roof - 375 to 500 sq. ft.  on gravel.

One EMERGENCY ROOF REPAIR KIT consists of: 8 5-gal. pails WET-JET, 1  5-gal. pail SUPER ROOF CEMENT, 1 6"x150' FABRON GLASS MEMBRANE, 1  Roofing Brush FREE.


The ultimate in an all-weather Roof Cement. Plasticized asphalt base  with heavy glass fiber content to form extra paste-like consistency for  sealing holes, breaks in roof mat, lining gutters and reinforcing seams. Can be immediately coated over with WET-JET or SILVERLEAF. Covers at  the rate of 1 gallon per 10 sq. ft. of flashing, 1 1/2 gallons per 10  sq. ft. for blister repairs. Color: Black.


This is a pure synthetic rubber sealant of trowel consistency with  resiliency that makes it the preferred product for critical deep surface cracks which have been reoccurring during the roof's history. Has 400%  stretch. For crack repair, estimate coverage at 100 lineal feet by 1/2"  depth by 1/4" width per gallon. One cartridge goes 30 lineal ft. in 1/8" crack. For the critical roof repair, estimate 1 gallon per 6 1/2 sq.  ft. at 1/4" thick. Apply only on clean, dry surface when temperature is  above 40 degrees F. Color: Black.


A remarkable adhesive coating designed for the special purpose of  bonding FABRON GLASS MEMBRANE to the roof mat, when it is necessary to  reinforce cracks in the roof base - also for strengthening flashings,  seams, joints. Sets up in 5 to 10 minutes (no longer) for embedding of  FABRON - dries completely in 30 minutes. Covers at the rate of 1 gallon  per 50 sq. ft. Furnished ready for use. Permanent repair.


A woven glass fiber fabric, asphalt impregnated with tensile strength in excess of 100 lbs. per sq. inch - twice the requirement of ordinary  cotton fabric. Inorganic, indestructible - will not rot, char, wear or  tear. Reinforcement between the roof and WET-JET or SILVERLEAF.  Recommended for stripping seams, reinforcing parapet walls, skylights,  relining gutters. Always imbed in SEA - TEX adhesive bond. Allow SEAL-TEX 5 to 10 minutes (no longer) to set up before embedding FABRON. After  another 30 minutes, apply finish coat of WET-JET or SILVERLEAF. Comes in 6", 12" and 36" widths, each 150 ft long.


A warp knit made of 100% polyester yarn fibers. White in color, it's  the strongest polyester fabric available and offers an excellent  combination of high strength and elongation to accommodate unusual  stress forces from thermal shock or building movement. In combination  with NEOPRENE 66 and WHITE-STAR, SEAL-LOCK membrane is recommended to  reinforce weak seams and flashings on single ply roof membranes. 4" x  300 ft long.


SEAM-STAR is a butter-like consistency for ease of application.  Withstands flexing over long periods of time. Can be brushed over seams  and fasteners for long lasting sealing before WHITE-STAR Rubber Base  Roof Coating. Surface should be clean, dry and free of dust, dirt, rust  and foreign matter. All cracks and seams from 1/64" to 1/8" wide must be reinforced with SEAM-STAR. Covers at the rate of approximately 75  lineal ft. per gallon. Apply 2" wide, 1/8" thick.


A heavy-duty weatherproof polyethylene breather vent. Easily  installed. Relieves vapor pressure. Insulation breathers allow wet  insulation to dry.


An easy to apply, clear, water-based solution that chemically  neutralizes existing rust and inhibits further corrosion. This special  industrial formulation is a quick, one-step alternative to priming,  improves adhesion and prepares rusted surfaces for painting and coating. As the latest generation of water-based, chemical solutions for  removing rust and converting the surface into a stable oxide, it's the  choice of building owners and maintenance supervisors nationwide.



pace products

Your Independent Pace Product Specialist